The D40MZ2-HY is designed for commercial hydroponic and irrigation systems that require accurate nutrient dosing at higher flow rates. Powered entirely by water flow, it delivers proportional nutrient injection from 0.2% to 2% (7.5 to 75 mL per gallon), automatically maintaining the selected concentration as water demand changes throughout the irrigation cycle. This ensures nutrients are delivered consistently across the entire growing area, helping support uniform crop development and efficient fertilizer use. With a flow capacity of 2.2 to 40 GPM, the D40MZ2-HY is well suited for larger hydroponic operations seeking dependable nutrient management without the need for electrical dosing equipment. The unit also includes a bypass and union fitting for simplified integration into nutrient delivery systems.
- Connection Size: 1 1/2" NPT
- Percentage Range: .2% to 2%
- Unit Weight: 12 lbs
- Flow: 2.2 to 40 GPM (8.32 to 151 LPM)
- Pressure: 4.3 to 116 PSI
- Dimensions: 25 1/4” x 8 1/2”
- Part Number: D40MZ2BPVFHY
- Injection Range mL per gal: 7.5 to 75 mL
Included Accessories: Mounting bracket, suction hose, bypass, union, weighted strainer, and quick start guide.
Key Specifications
Weight
12
Water Flow Range
2.2 - 40
Operating Pressure Range
4.3 - 116
Maximum Temperature
104
Pressure loss

For optimal performance, the D40MZ2-HY should be installed in series within a properly designed hydroponic irrigation system where water pressure and flow remain within the recommended operating range. Adequate upstream filtration helps protect internal components and preserve dosing accuracy over time, while the included bypass arrangement allows nutrient injection to be isolated during maintenance or system adjustments. Locating nutrient stock tanks close to the injector and minimizing suction lift helps maintain stable concentrate pickup and consistent nutrient delivery. Proper pipe sizing and system design are also important to ensure even nutrient distribution across larger growing areas. A well-planned installation helps maximize fertilizer efficiency, improve crop uniformity, and support reliable long-term operation.
Every application is different. Flow rates, water quality, chemical compatibility, and installation requirements all impact the best injector configuration.
Contact a Dosatron expert today to determine the ideal setup for your application.
Find your maintenance kit in seconds — just check how long your pump has been in service.
Time in service | Recommended kit | Why | Buy Now |
|---|---|---|---|
Under 6 months | Mini Maintenance Kit | Quick refresh of the wear parts that go first — keeps dosing accuracy on spec. | Click here |
6 months – 2 years | Seal Kit | Replaces the seals and O-rings before leaks and dosing drift start. | Click here |
Over 2 years | Rebuild Kit | A full internal overhaul — restores your pump to factory performance. | Click here |
Over 5 years | Talk to our team | At this stage the motor piston typically needs replacing. We'll confirm the right solution for your unit. |
|
Need a single replacement part instead of a full kit?
D40MZ SERIES SPOTLIGHT
Tom Talk – Dosatron Injector Mastery: Unleashing Precision with D40MZ Series
To load this content, approve your cookie preferences and allow the required cookies.
Reach out to us
