Built for vehicle wash operations that require higher chemical injection rates, the D14MZ2-D delivers precise, water-powered dosing without the need for electricity. With an adjustable injection range of 1:500 to 1:50 (0.2% to 2%), the unit continuously maintains the selected dilution ratio as water flow changes throughout the wash cycle. This proportional dosing technology helps ensure consistent application of detergents, presoaks, wheel cleaners, waxes, and specialty chemicals, reducing waste while maintaining wash quality. Designed for flows up to 14 GPM, the D14MZ2-D provides reliable performance in demanding car wash environments where accuracy, simplicity, and chemical cost control are critical.
- Connection Size: 3/4" NPT
- Percentage Range: 0.2 to 2%
- Unit Weight: 6 lbs
- Ounces Per Gallon Range: 0.256 to 2.560
- Flow: 0.05 to 14 GPM (0.19 to 50 LPM)
- Pressure: 4.3 to 85 PSI
- Dimensions: 19 1/8" x 6 5/16"
- Ratio Range: 1:500 to 1:50
Included Accessories:Mounting bracket, suction hose, weighted strainer, and quick start guide.
Key Specifications
Weight
6
Water Flow Range
0.05 - 14
Operating Pressure Range
4.3 - 85
Maximum Temperature
104
Pressure loss

Viscosity limits

To achieve optimal dosing accuracy and long-term reliability, the D14MZ2-D should be installed in a location with stable water pressure and appropriate filtration to protect internal components from debris. Many operators choose to install the injector on a dedicated chemical feed or bypass system, allowing maintenance and chemical changes without interrupting operations. Isolation valves and backflow prevention devices are recommended to enhance system protection and serviceability. Keeping the concentrate container close to the injector and minimizing suction distance helps maintain smooth chemical uptake and consistent dosing performance. Proper installation not only improves day-to-day efficiency but also helps extend equipment life in high-use car wash applications.
Every application is different. Flow rates, water quality, chemical compatibility, and installation requirements all impact the best injector configuration.
Contact a Dosatron expert today to determine the ideal setup for your application.
Find your maintenance kit in seconds — just check how long your pump has been in service.
Time in service | Recommended kit | Why | Buy Now |
|---|---|---|---|
Under 6 months | Mini Maintenance Kit | Quick refresh of the wear parts that go first — keeps dosing accuracy on spec. | |
6 months – 2 years | Seal Kit | Replaces the seals and O-rings before leaks and dosing drift start. | |
Over 2 years | Rebuild Kit | A full internal overhaul — restores your pump to factory performance. | |
Over 5 years | Talk to our team | At this stage the motor piston typically needs replacing. We'll confirm the right solution for your unit. |
Need a single replacement part instead of a full kit?
Reach out to us
