The D14MZ3000-D is designed specifically for car wash applications where highly accurate, low-dose chemical injection is essential. Using Dosatron's water-powered technology, it injects concentrates at ratios from 1:3000 to 1:333 (0.03% to 0.3%), automatically adjusting dosing in proportion to water flow. This ensures consistent chemical concentrations throughout the wash process, helping maintain cleaning performance while reducing overconsumption of detergents, presoaks, drying agents, and specialty wash chemicals. The result is improved chemical efficiency, consistent wash quality, and lower operating costs.
- Connection Size: 3/4" NPT
- Percentage Range: 0.03 to 0.3%
- Unit Weight: 6 lbs
- Ounces Per Gallon Range: 0.0425 to 0.384
- Flow: 0.05 to 14 GPM (0.19 to 50 LPM)
- Pressure: 4.3 to 85 PSI
- Dimensions: 21" X 6 5/16"
- Ratio Range: 1:3000 to 1:333
Included Accessories:Mounting bracket, suction hose, weighted strainer, and quick start guide.
Key Specifications
Weight
6
Water Flow Range
0.05 - 14
Operating Pressure Range
4.3 - 85
Maximum Temperature
104
Pressure loss

Viscosity limits

For dependable performance, the D14MZ3000-D should be installed on a dedicated bypass or metering line with adequate filtration and isolation valves. Proper backflow prevention is recommended to protect both the water supply and chemical inventory, while easy access to the injector simplifies routine servicing and maintenance. Positioning the chemical container close to the unit and avoiding excessive suction lift promotes stable concentrate pickup and accurate dosing. A well-planned installation helps maximize injector life and ensures reliable operation in demanding vehicle wash environments.
Every application is different. Flow rates, water quality, chemical compatibility, and installation requirements all impact the best injector configuration.
Contact a Dosatron expert today to determine the ideal setup for your application.
Find your maintenance kit in seconds — just check how long your pump has been in service.
Time in service | Recommended kit | Why | Buy Now |
|---|---|---|---|
Under 6 months | Mini Maintenance Kit | Quick refresh of the wear parts that go first — keeps dosing accuracy on spec. | |
6 months – 2 years | Seal Kit | Replaces the seals and O-rings before leaks and dosing drift start. | |
Over 2 years | Rebuild Kit | A full internal overhaul — restores your pump to factory performance. | |
Over 5 years | Talk to our team | At this stage the motor piston typically needs replacing. We'll confirm the right solution for your unit. |
Need a single replacement part instead of a full kit?
Reach out to us
