Process water refers to both water for boiler feed, cooling water, demineralised water and water suitable for industrial use.
It is a water that must be slightly or not hard in order to avoid any scaling in the heating systems. It must be able to prevent any corrosion.
Its quality will differ according to industrial applications.
Applications
- Disinfection of microfiltration, ultrafiltration and reverse osmosis units
- Maintenance of hot or cold water networks
- Treatment against legionellosis
Recommended Dosing Pumps
D3WL3000VFK Water Line Dosing Pump
Dosing rate 0.03 to 0.3%
D3WL3000 IE
Optimize water treatment with the control of the D3WL3000 IE chlorine dosing pump.
D3WL2
Ensure efficient water treatment with the D3WL2 chlorine dosing pump.
D8WL3000
Experience precise water treatment with the D8WL3000 chlorine dosing pump.
D8WL30000 IE
Achieve reliable water treatment with the intelligent D8WL30000 IE chlorine dosing pump.
D8WL2
Discover precise and reliable chemical dosing with the compact D8WL2 chlorine dosing pump.
D9WL3000 (ACS)
Dosing rate 0.03 to 0.2%
D9WL2 (ACS)
The D9WL2 (ACS) it's a reliable and constant dosing whatever the variation of flow and pressure + an installation simple without electrical expertise.
D9WL5
Designed for drinking water applications, treatment and disinfection of water, for networks up to 9 m3/h
D20WL2
Optimize your drinking water disinfection with alkaline biocides thanks to the Dosatron D20WL2
ILS Clack n' Track pulse emitter
The Reed switch Clack n' Track technology of our dosing pumps guarantees water treatment management in isolated areas.