Industries
Hemp
Nutrient Delivery System
Water Treatment
Products
logo.png

Protecting a Critical Resource

Clean water is essential for life and industry. Wastewater treatment plants safeguard this resource by removing solids, chemicals, and bacteria, allowing for the safe reuse of water.

Dosatron’s wastewater treatment pumps make this job simple. Each pump adds the exact amount of chemical needed to treat water correctly. This accuracy improves water quality, cuts disposal costs, and helps meet local regulations.

Clean water is vital for communities and industry alike. Every gallon that can be treated and reused reduces the strain on natural water sources. This process also helps cities lower treatment costs and protect surrounding ecosystems.

Because Dosatron pumps run on water pressure, they do not need electricity. That saves energy and reduces setup time. Our systems are used in cities, factories, and farms around the world. Whether for sludge dewatering, flocculation, or pH control, Dosatron pumps give operators results they can rely on.

 

Why Choose Dosatron Wastewater Treatment Pumps?

A good dosing system keeps treatment steady and predictable. Dosatron’s water-powered pumps are easy to use and built for long service. No power source is needed, so they work even in remote locations.

The pump adjusts automatically as water flow changes. This means every drop receives the right amount of treatment chemical. The result is cleaner water, less waste, and lower costs.

Dosatron pumps are self-priming, require little maintenance, and stop dosing automatically if water stops flowing. This feature protects equipment and prevents overdosing.

By using simple mechanics instead of complex electronics, our pumps save operators time, energy, and money.

Many operators also appreciate that our systems are plug-and-play. Once installed, they require no complex calibration or electronic programming. This makes Dosatron pumps easy to set up, even for teams with limited technical training.

These user-friendly features help facilities save both time and labor, ensuring efficient operation even in demanding environments.

 

Metering Pumps for Sludge Dewatering and Wastewater Flocculation

Sludge treatment demands accuracy. Traditional electric pumps can be hard to set up and often need repairs. Dosatron’s wastewater treatment pumps simplify this work. They use water flow itself to control chemical feed, keeping the dose steady at all times.

When sludge is handled efficiently, plants save money on hauling and disposal. Drier sludge means lower weight, which directly cuts transport costs and landfill fees. That’s why accurate polymer dosing plays such a key financial role.

Stable dosing means better sludge separation and cleaner discharge water. Because the pump has few moving parts, it needs less attention from maintenance crews.

No electricity also means lower running costs. These advantages make Dosatron ideal for both fixed plants and mobile units used in the field.

Operators report fewer shutdowns, less chemical waste, and longer equipment life, a clear gain for daily operations.

 

Usage Recommendations for Our WWT Dosing Pumps

For best performance from your wastewater treatment pumps, follow these quick tips:

  • Check polymer properties: Review viscosity in the Material Safety Data Sheet (MSDS) before setup.
  • Shorten suction lines: Keep pipes short to reduce pressure loss and improve accuracy.
  • Add a Dynamic Mixer: Place a Dosatron Dynamic Mixer after the pump for even blending (max flow: 2.5 m³/h). Use a maturation tank: Helps activate anionic polymers, check with your supplier for details.
  • Control temperature: Avoid sudden temperature shifts that affect polymer quality.
  • Add a stirrer if needed: Use an electric stirrer for unstable or sensitive polymers.
  • Fine-tune flow and dosage: Adjust directly on the pump for maximum separation efficiency.

These simple steps not only protect the pump but also ensure smoother daily operation. When maintained properly, Dosatron pumps can run for years without major servicing, offering consistent results shift after shift. Following these steps keeps dosing consistent, reduces waste, and extends pump life,key advantages of choosing Dosatron.

Sludge Dewatering Installation with Our WWT Dosing Pumps (after coagulation)

WasteWater treatment Pump installation - Sludge dewatering application

The sludge stage separates solids from water. Too much polymer wastes product; too little lowers dryness.

Its self-cleaning valve stops clogs, even with thick polymers. After each run, the valve rinses itself, saving cleanup time and extending service life.

Because the design is purely hydraulic, there are no electronic sensors or motors to fail. This makes the PU1 dependable even in harsh field conditions where power reliability can be an issue. It runs entirely on water power, so no wiring or control panels are needed.

Wastewater Flocculation Installation with Our WWT Dosing Pumps

WasteWater treatment Pump installation - Flocculation application

Flocculation joins small particles so they settle faster. Uneven dosing can ruin this step. Dosatron pumps deliver the right mix every time.

Check the polymer type and thickness before starting. The Dosatron again is ideal for thick polymers that clog other units. It stays clear and keeps chemical flow steady.

The polymer solution then moves through the Dynamic Mixer, which spreads it evenly through the water. This produces larger, stronger flocs and cleaner effluent.

With smoother mixing and less waste, operators cut costs and boost daily output.

Operators often notice faster settling times and less chemical foam formation when switching to Dosatron systems. This consistent performance helps keep downstream equipment cleaner and extends the life of filters and clarifiers.

 

Versatile Wastewater Treatment Pumps for Multiple Applications

Dosatron’s wastewater treatment pumps work in many parts of a plant, not just flocculation or dewatering. They are used for:

  • Cleaning and maintaining filter presses
  • Odor control and neutralization
  • pH correction and chemical dilution
  • Polymer preparation and blending

Every model offers the same key benefits: precise dosing, no power use, and low maintenance. The pump adjusts automatically to flow changes, keeping results consistent and repeatable.

From the first treatment stage to final clarification, Dosatron delivers accuracy, savings, and peace of mind. Built to last, our pumps help facilities cut disposal costs and operate more sustainably.

Each system is backed by Dosatron’s global support network, providing parts, service, and training when needed. Our goal is to make wastewater management simpler, safer, and more cost-efficient for every operator.