Choose a different country or region to see the content specific to your location
Current Region: Global (EN)
This site uses some unobtrusive cookies to store information on your computer. By using the website, you hereby agree on cookies storage.
OK
Cookie Policy
Always carry out a physico-chemical and bacteriological analysis before disinfecting your drinking water.
Depending on the results of the analysis, the following may be required :
Dosatron proportional dosing pumps guarantee the correct dosage of biocides (such as sodium or calcium hypochlorite, NaDCC, chlorine dioxides, peroxides and salt electrolysis products) regardless of the permanent variations in water pressure and water flow (due to animal random drinking behavior).
The non-electric Dosatron proportional dosing pumps operate under gravity pressure (header tanks), are self-priming (no loss of prime due to gases released by the biocides) and ensure that biocides are added to the drinking water under the best possible conditions.
They are easy to read and allow you to adjust the dosing percentage. They can be run empty (without additives) without any risk of damage or interrupting the water supply to the animals. They are also quick and easy to maintain.
We also work closely with our partners from all over the world to hold regular technical seminars and develop specialised tools (Training materials on water treatment techniques and chlorination calculators).
Please contact us for the chemical compatibility of the additives used with the different Dosatron models (Additive Safety Data Sheet).
We should include the customised dosing pump information sheets (such as Eurotier digital sheets).
Usually added before the buffer tank to ensure minimum contact time.
D3WL3000 IE AF | Dosing range: 0.03 to 0.3% | Flow rate: 10 l/h to 3 m3/h | Maximum recommended daily water volume: 10 m3/day.
Do not exceed 10 g/l of active chlorine in the stock solution (risk of rapid lime scale build-up in hard water).
D8WL3000 IE AF | Dosing range: 0.03 to 0.15% | Flow rate: 500 l/h to 8 m3/h | Maximum recommended daily water volume: 30 m3/day.
Do not exceed 10 g/l of active chlorine in the stock solution (risk of rapid lime scale build-up in hard water).
D20WL2 AF | Dosing range: 0.2 to 2% | Flow rate: from 1 l/h to 20 m3/h | Maximum recommended daily water volume: 100 m3/day. Do not exceed 1 g/l of active chlorine in the stock solution (risk of rapid lime scale build-up in hard water)
D30WL30000 AF | Dosing range: 0.003 to 0.03% | Flow rate: 8 l/h to 30 m3/h | Maximum recommended daily water volume: 100 m3/day.
When pre-diluting, do not exceed 10 g/l of active chlorine in the stock solution (risk of rapid lime scale build-up in hard water).
D3WL3000 VF K | dosing range: 0.03 to 0.3% - up to 3 m3/h and 10 m3/day max recommended
D8WL3000 VF K | dosing range: 0.03 to 0.15% - up to 8 m3/h and 30 m3/day max recommended
D30WL5000 VF K |(dosing range: 0.02 to 0.2% - up to 30 m3/h and 100 m3/day max recommended
*for chlorine dioxides, do not exceed 2 g/l in the stock solution
D3RE5 VF or D3RE10 VF | Dosing range: 1 to 5% or 1 to 10% | Flow rate: 10 to 3 m3/h | Maximum recommended daily water volume: 10 m3/day.
Two D3 dosing pumps can be installed in parallel to increase the flow range (10 l/h to 6m3/h) > please contact us for installation diagram.
D8RE5 VF | Dosing range: 1 to 5% | Flow rate: 500 l/h to 8 m3/h | Maximum recommended daily volume: 30 m3/day
About DOSATRON
Water-powered proportional dosing pumps manufacturer since 1974. DOSATRON provides you with quality fluid handling equipment, service excellence, a high level of expertise, and customer proximity all over the world.