ACS certified chlorine dosing pumps - Water flow up to 3m3/h

Why using a certified chlorine dosing pump is important ?

In order to make the water drinkable, the Dosatron ACS or NSF certified metering pumps, installed in line with the water pipe, inject a dose of chlorine (NaClo, CaClo) which allows the destruction of organic matter such as viruses and microbes contained in the water, in proportion to the flow rate.

Since a large part of the chlorine is needed to neutralize these organic materials, the dose of chlorine delivered by the metering pump will allow a part, called free residual chlorine, to remain available to treat possible future contamination of the water in the network or in the homes.

According to the WHO, in drinking water, the free chlorine concentration of the treated water should be 0.2 to 0.5 mg/l.

ACS certification - Chlorine dosing pumps

Dosatron chlorine dosing pumps certified by the ACS (Link 1 | Link 2 | Link 3 | Link 4 | Link 5) comply with the quality requirements set out in the French Public Health Code (CSP) transposing Directive 98/83/EC of 3 November 1998 on the quality of water intended for human consumption.

The validity of a certificate can be verified by contacting the issuing laboratory, or by consulting the list of valid health certificates of conformity published by the Carso Group laboratories.

Dosing pump operating principle

Installed on the water network, our chlorine dosing pump uses water pressure as its sole driving force. Thus actuated, it sucks up the concentrated product, doses it at the desired percentage, then mixes it with the driving water. The resulting solution is then sent downstream. The dose of product injected is always proportional to the volume of water flowing through our dosing pump, regardless of variations in flow rate or network pressure.

See more on how our dosing pumps work.

operating principle D3 chlorine dosing pumps

What specific features for these dosing pumps ?

The D3WL range of chlorine dosing pumps meets dosing requirements for flow rates from 10 to 3,000 l/h.

The D3WL ACS chlorine dosing pumps have also obtained the mandatory French approval (ACS) for all equipment in contact with water intended for human consumption. See more

These chlorine dosing pumps are characterized by:

  • An optimized design.
  • A polypropylene pump casing.
  • Highly ergonomic dosage adjustment.
  • The availability of micro and macro dosages.
  • One injection at the exit.
  • AF seals adapted to alkaline products.

ACS certified chlorine dosing pumps - Water flow up to 3m3/h