NSF certified chlorine dosing pumps - Water flow up to 3m3/h

Why using a certified chlorine dosing pump is important ?

IIn order to make the water drinkable, the Dosatron ACS or NSF certified metering pumps, installed in line with the water pipe, inject a dose of chlorine (NaClo, CaClo) which allows the destruction of organic matter such as viruses and microbes contained in the water, in proportion to the flow rate.

Since a large part of the chlorine is needed to neutralize these organic materials, the dose of chlorine delivered by the metering pump will allow a part, called free residual chlorine, to remain available to treat possible future contamination of the water in the network or in the homes.

According to the WHO, in drinking water treatment, the free chlorine concentration of the treated water should be 0.2 to 0.5 mg/l.

 NSF chlorine dosing pump certification logo

NSF/ANSI certification - Chlorine dosing pumps

The NSF/ANSI 61 & 372 standard was developed to establish requirements for potential adverse effects on human health of equipment in contact with drinking water (production, transport).

The NSF/ANSI 61 & 372 certified chlorine dosing pumps were subjected to a detailed toxicological analysis. The composition of each device (sub-assemblies, materials, suppliers) was analyzed and referenced by NSF International. Each device has undergone release tests to confirm that harmful particles do not migrate into the water.

The integration of NSF/ANSI 61 & 372 certified chlorine dosing pumps in water treatment applications offers a real alternative to standard dosing technologies, providing precision, robustness and ease of maintenance while protecting the health of users.

Dosing pump operating principle

Installed on the water network, our chlorine dosing pump uses water pressure as its sole driving force. Thus actuated, it sucks up the concentrated product, doses it at the desired percentage, then mixes it with the driving water. The resulting solution is then sent downstream. The dose of product injected is always proportional to the volume of water flowing through our dosing pump, regardless of variations in flow rate or network pressure.

See more on how our dosing pumps work.

operating principle D3 chlorine dosing pumps

What specific features for these dosing pumps ?

The D3WL range of chlorine dosing pumps meets dosing requirements for flow rates from 10 to 3,000 l/h.

The D3WL NSF chlorine dosing pumps have obtained the NSF/ANSI/CAN 61 certification: Drinking Water System Components - Health Effects NSF (American approval for all equipment in contact with water intended for human consumption). See more

These chlorine dosing pumps are characterized by:

  • An optimized design.
  • Proportional dosing and without electricity.
  • Proportionality dependent on water flow.
  • AF seals adapted to alkaline products.

NSF certified chlorine dosing pumps - Water flow up to 3m3/h